Home › BRAKE › BRAKE CONTROL › SKID CONTROL BUZZER (w/ VSC)

SKID CONTROL BUZZER (w/ VSC) > INSTALLATION

for Preparation Click here



1. INSTALL SKID CONTROL BUZZER


    C133331E01
  1. Attach the clip and install the skid control buzzer.

  1. Connect the skid control buzzer connector.



2. INSTALL NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY
  1. Connect each connector.



    B133986
  1. Engage the 3 claws and 2 clips to install the No. 1 instrument panel sub-assembly.



3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL


    B144612
  1. Engage the 2 claws and 2 clips to install the lower instrument panel finish panel.



4. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL LH


    B147263E01
  1. Install the air hose and connect the connector.

  1. Engage the 2 claws and the DLC3.

  1. Engage the claw and the 4 clips.

  1. Instal the lower instrument panel finish panel LH with the screw <B> and bolt <A>.



5. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH


    B132116E01
  1. Engage the 2 clips.

  1. Install the cowl side trim sub-assembly LH with the cowl side trim clip.



6. INSTALL FRONT DOOR SCUFF PLATE LH


    B132067
  1. Engage the 7 claws and 3 clips, then install the front door scuff plate LH.