Home
›
ENGINE · 2GR-FE
›
ENGINE CONTROL SYSTEM
›
THROTTLE BODY
THROTTLE BODY > INSPECTION
for Preparation
Click here
1. INSPECT THROTTLE WITH MOTOR BODY ASSEMBLY
Measure the resistance between the terminals.
Standard resistance:
Tester Connection
Condition
Specified Condition
2 (M+) - 1 (M-)
20°C (68°F)
0.3 to 100 Ω
5 (VC) - 3 (E2)
20°C (68°F)
1.2 to 3.2 kΩ
If the result is not as specified, replace the throttle body assembly.