Home › ENGINE · 2GR-FE › ENGINE CONTROL SYSTEM › EFI RELAY

EFI RELAY > INSPECTION

for Preparation Click here



1. INSPECT EFI RELAY


    A137364E01
  1. Using an ohmmeter, measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester connection
    Specified Condition
    1E-9 - 1E-10
    Below 1 Ω
    1E-7 - 1E-12
    10 kΩ or higher
    1E-7 - 1E-12
    Below 1 Ω (Battery voltage applied between terminals 1E-9 and 1E-10)