Home › BODY ELECTRICAL › WIPER AND WASHER › WIPER SWITCH

WIPER SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY


    E128825
  1. Engage the claw and install the windshield wiper switch assembly as shown in the illustration.

  1. Connect the 2 connectors.



2. INSTALL STEERING COLUMN COVER


    C139581
  1. Engage the claw to install the upper steering column cover.



    C132544
  1. Engage the 2 claws to install the lower steering column cover.

  1. Install the 2 screws.

    Torque:
    2.0 N*m{ 20 kgf*cm , 18 in.*lbf }