Home › BODY ELECTRICAL › WIPER AND WASHER › WIPER SWITCH

WIPER SWITCH > REMOVAL

for Preparation Click here



1. REMOVE STEERING COLUMN COVER


    C132544
  1. Remove the 2 screws.

  1. Disengage the 2 claws to remove the lower steering column cover.



    C139581
  1. Disengage the claw to remove the upper steering column cover.



2. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY


    E128824
  1. Disconnect the 2 connectors.

  1. Disengage the claw and remove the windshield wiper switch assembly as shown in the illustration.

    NOTICE:
    If the claw is pushed with excessive force, it may break.