Home › BODY ELECTRICAL › OTHER SYSTEM › POWER OUTLET SOCKET

POWER OUTLET SOCKET > INSTALLATION

for Preparation Click here



1. INSTALL REAR POWER OUTLET SOCKET ASSEMBLY (for Automatic Transaxle)


    E129970
  1. Referring to the shape of the parts, align the rear power outlet socket assembly with the rear power outlet socket cover and install the rear power outlet socket assembly.



2. INSTALL FRONT POWER OUTLET SOCKET ASSEMBLY


    E129968
  1. Referring to the shape of the parts, align the front power outlet socket assembly with the front power outlet socket cover and install the front power outlet socket assembly.



3. INSTALL LOWER INSTRUMENT CLUSTER FINISH PANEL CENTER SUB-ASSEMBLY
  1. Connect each connector.



    B141243E01
  1. Engage the 2 claws and 2 clips.

  1. Install the lower instrument cluster finish panel center sub-assembly with the 2 screws <F>.



4. INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle)


    B144603E01
  1. Connect the connector and engage the clamp.

  1. Engage the 3 claws and 5 clips to install the upper console rear panel sub-assembly.



5. INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Manual Transaxle)


    B144604
  1. Engage the 3 claws and 5 clips to install the upper console rear panel sub-assembly.



6. INSTALL FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY (for Automatic Transaxle)
  1. with Seat Heater System:

    1. Connect each connector.



    B148447
  1. Engage the 6 claws and the 3 clips to install the floor shift position indicator housing sub-assembly.



7. INSTALL UPPER CONSOLE PANEL (for Manual Transaxle)


    B145877
  1. Engage the 2 claws and the 5 clips to install the upper console panel as shown in the illustration.



8. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH


    B144605
  1. Engage the 2 clips and install the No. 2 instrument cluster finish panel garnish.



9. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH


    B144599
  1. Engage the 2 clips and install the No. 1 instrument cluster finish panel garnish.



10. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle)


    B148448
  1. Install the shift lever knob sub-assembly.



11. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)


    B144601
  1. Install the shift lever knob sub-assembly.