Home › BODY › SEAT › REAR SEAT ASSEMBLY (for Fold Down Seat Type)

REAR SEAT ASSEMBLY (for Fold Down Seat Type) > INSTALLATION

for Preparation Click here



1. INSTALL REAR SIDE SEATBACK ASSEMBLY LH


    B136561
  1. Install the rear side seatback assembly with the bolt.

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }



2. INSTALL REAR SIDE SEATBACK ASSEMBLY RH


3. INSTALL SEPARATE TYPE REAR SEATBACK ASSEMBLY LH


    B136539
  1. Install the separate type rear seatback assembly with the 2 bolts.

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }



4. INSTALL SEPARATE TYPE REAR SEATBACK ASSEMBLY RH


    B134700
  1. Install the separate type rear seat back assembly with the 2 bolts.

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }



5. INSTALL REAR CENTER SEAT HEADREST ASSEMBLY
  1. Install the rear center seat headrest assembly.



6. INSTALL REAR SEAT HEADREST ASSEMBLY
  1. Install the 2 rear seat headrest assemblies.



7. INSTALL REAR SEAT CUSHION ASSEMBLY


    B140584E01
  1. Attach the front hooks of the bench type rear seat cushion assembly to the vehicle body.

  1. Confirm that the seat cushion is firmly installed.

    NOTICE:
    When installing the bench type rear seat cushion assembly, make sure that the seat belt buckle is not under the bench type rear seat cushion assembly.