REAR SEAT ASSEMBLY (for Fold Down Seat Type) > REASSEMBLY |
| 1. INSTALL REAR SEPARATE TYPE SEATBACK COVER (for LH Side) |
![]() |
Using hog ring pliers, install the rear separate type seatback cover with 9 new hog rings.
| 2. INSTALL REAR SEPARATE TYPE SEATBACK COVER (for RH Side) |
![]() |
Using hog ring pliers, install the rear separate type seatback cover to the seatback pad with 9 new hog rings.
![]() |
Using hog ring pliers, install the rear separate type seatback cover to the seatback pad with 7 new hog rings.
| 3. INSTALL REAR SEATBACK FRAME SUB-ASSEMBLY RH |
| 4. INSTALL REAR SEATBACK FRAME SUB-ASSEMBLY LH |
| 5. INSTALL REAR SEAT HEADREST SUPPORT (for LH Side) |
![]() |
Engage the 2 claws to install the 2 front seat headrest supports.
![]() |
Using hog ring pliers, install the rear separate type seatback cover to the seat back frame with 6 new hog rings.
| 6. INSTALL REAR SEAT HEADREST SUPPORT (for LH Side) |
![]() |
Engage the 2 claws to install the 2 front seat headrest supports.
![]() |
Using hog ring pliers, install the rear separate type seatback cover to the seatback frame with 7 new hog rings.
| 7. INSTALL REAR SEATBACK LOCK BEZEL UPPER |
| 8. INSTALL REAR SEAT HEADREST SUPPORT (for RH Side) |
| 9. INSTALL REAR SEAT HEADREST SUPPORT (for RH Side) |
| 10. INSTALL REAR SEATBACK LOCK BEZEL UPPER (for RH Side) |
| 11. INSTALL REAR SEAT SHOULDER BELT GUIDE RH |
| 12. INSTALL REAR SEAT SHOULDER BELT GUIDE LH |
| 13. INSTALL REAR SEAT BELT HOOK |
| 14. INSTALL REAR CENTER SEAT ARMREST ASSEMBLY |
| 15. INSTALL REAR SEATBACK HINGE COVER |
| 16. INSTALL NO. 1 SEAT ARMREST CAP |
| 17. INSTALL REAR BENCH TYPE SEAT CUSHION COVER |
Using hog ring pliers, install 16 new hog rings.

Using hog ring pliers, install the rear bench type seat cushion cover to the seat cushion pad with 36 new hog rings.
