Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION ANTENNA CORD

NAVIGATION ANTENNA CORD > INSTALLATION

for Preparation Click here



1. INSTALL NAVIGATION ANTENNA ASSEMBLY


    E185394
  1. Install the navigation antenna assembly with the 2 screws.

  1. Engage the 3 clamps.



2. INSTALL NO. 2 HEATER TO REGISTER DUCT


    B134021E02
  1. Install the No. 2 heater to register duct with the 2 screws <F>.



3. INSTALL NO. 3 HEATER TO REGISTER DUCT


    B134020E02
  1. Install the No. 3 heater to register duct with the 3 screws <F>.



4. INSTALL NO. 1 HEATER TO REGISTER DUCT


    B134019E02
  1. Install the No. 1 heater to register duct with the 3 screws <F>.



5. INSTALL DEFROSTER NOZZLE ASSEMBLY


    B134018E02
  1. Install the defroster nozzle assembly with the 3 screws <F>.



6. INSTALL SIDE NO. 2 DEFROSTER NOZZLE DUCT


    B134017E02
  1. Install the side No. 2 defroster nozzle duct with the screw <F>.



7. INSTALL SIDE NO. 1 DEFROSTER NOZZLE DUCT


    B134016E02
  1. Install the side No. 1 defroster nozzle duct with the screw <F>.



8. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY

HINT:
Refer to the procedure from Install Instrument Panel Safety Pad Assembly (Click here).