Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION ANTENNA CORD

NAVIGATION ANTENNA CORD > REMOVAL

for Preparation Click here



1. REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY

HINT:
Refer to the procedure up to Remove Instrument Panel Safety Pad Assembly (Click here).



2. REMOVE SIDE NO. 1 DEFROSTER NOZZLE DUCT


    B134016E02
  1. Remove the screw <F> and the side No. 1 defroster nozzle duct.



3. REMOVE SIDE NO. 2 DEFROSTER NOZZLE DUCT


    B134017E02
  1. Remove the screw <F> and the side No. 2 defroster nozzle duct.



4. REMOVE DEFROSTER NOZZLE ASSEMBLY


    B134018E02
  1. Remove the 3 screws <F> and the defroster nozzle assembly.



5. REMOVE NO. 1 HEATER TO REGISTER DUCT


    B134019E02
  1. Remove the 3 screws <F> and the No. 1 heater to register duct.



6. REMOVE NO. 3 HEATER TO REGISTER DUCT


    B134020E02
  1. Remove the 3 screws <F> and the No. 3 heater to register duct.



7. REMOVE NO. 2 HEATER TO REGISTER DUCT


    B134021E02
  1. Remove the 2 screws <F> and the No. 2 heater to register duct.



8. REMOVE NAVIGATION ANTENNA ASSEMBLY


    E185394
  1. Disengage the 3 clamps.

  1. Remove the 2 screws and navigation antenna assembly.