INSTRUMENT PANEL SAFETY PAD > DISASSEMBLY |
| 1. REMOVE SIDE NO. 1 DEFROSTER NOZZLE DUCT |
![]() |
Remove the screw <F> and the side No. 1 defroster nozzle duct.
| 2. REMOVE SIDE NO. 2 DEFROSTER NOZZLE DUCT |
![]() |
Remove the screw <F> and the side No. 2 defroster nozzle duct.
| 3. REMOVE DEFROSTER NOZZLE ASSEMBLY |
![]() |
Remove the 3 screws <F> and the defroster nozzle assembly.
| 4. REMOVE NO. 1 HEATER TO REGISTER DUCT |
![]() |
Remove the 3 screws <F> and the No. 1 heater to register duct.
| 5. REMOVE NO. 3 HEATER TO REGISTER DUCT |
![]() |
Remove the 3 screws <F> and the No. 3 heater to register duct.
| 6. REMOVE NO. 2 HEATER TO REGISTER DUCT |
![]() |
Remove the 2 screws <F> and the No. 2 heater to register duct.
| 7. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY (for LHD) |
Disengage the 6 clamps and clip and remove the No. 2 antenna cord sub-assembly.

| 8. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY (for RHD) |
Disengage the 6 clamps and clip and remove the No. 2 antenna cord sub-assembly.

| 9. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY |
![]() |
Remove the 2 screws.
![]() |
Disengage the 10 hooks and remove the front passenger airbag assembly from the instrument panel safety pad assembly.
| 10. REMOVE GLOVE BOX LIGHT ASSEMBLY |
![]() |
Disengage the 2 claws and remove the glove box light assembly.
| 11. REMOVE PLASMACLUSTER (w/ Plasmacluster) |
![]() |
Remove the 2 screws and Plasmacluster.