Home › BODY › INSTRUMENT PANEL › INSTRUMENT PANEL SAFETY PAD

INSTRUMENT PANEL SAFETY PAD > REASSEMBLY

for Preparation Click here



1. INSTALL PLASMACLUSTER (w/ Plasmacluster)


    E128542
  1. Install the Plasmacluster with the 2 screws.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }



2. INSTALL GLOVE BOX LIGHT ASSEMBLY


    B134023
  1. Engage the 2 claws and install the glove box light.



3. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY


    C132566
  1. Engage the 10 hooks and install the front passenger airbag assembly on the instrument panel safety pad assembly.



    C132565
  1. Install the 2 screws.



4. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY (for LHD)


  1. Engage the 6 clamps and clip and install the No. 2 antenna cord sub-assembly.


    E129184E01



5. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY (for RHD)


  1. Engage the 6 clamps and clip and install the No. 2 antenna cord sub-assembly.


    E129185E01



6. INSTALL NO. 2 HEATER TO REGISTER DUCT


    B134021E02
  1. Install the No. 2 heater to register duct with the 2 screws <F>.



7. INSTALL NO. 3 HEATER TO REGISTER DUCT


    B134020E02
  1. Install the No. 3 heater to register duct with the 3 screws <F>.



8. INSTALL NO. 1 HEATER TO REGISTER DUCT


    B134019E02
  1. Install the No. 1 heater to register duct with the 3 screws <F>.



9. INSTALL DEFROSTER NOZZLE ASSEMBLY


    B134018E02
  1. Install the defroster nozzle assembly with the 3 screws <F>.



10. INSTALL SIDE NO. 2 DEFROSTER NOZZLE DUCT


    B134017E02
  1. Install the side No. 2 defroster nozzle duct with the screw <F>.



11. INSTALL SIDE NO. 1 DEFROSTER NOZZLE DUCT


    B134016E02
  1. Install the side No. 1 defroster nozzle duct with the screw <F>.