INSTRUMENT PANEL SAFETY PAD > REASSEMBLY |
| 1. INSTALL PLASMACLUSTER (w/ Plasmacluster) |
![]() |
Install the Plasmacluster with the 2 screws.
| 2. INSTALL GLOVE BOX LIGHT ASSEMBLY |
![]() |
Engage the 2 claws and install the glove box light.
| 3. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY |
![]() |
Engage the 10 hooks and install the front passenger airbag assembly on the instrument panel safety pad assembly.
![]() |
Install the 2 screws.
| 4. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY (for LHD) |
Engage the 6 clamps and clip and install the No. 2 antenna cord sub-assembly.

| 5. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY (for RHD) |
Engage the 6 clamps and clip and install the No. 2 antenna cord sub-assembly.

| 6. INSTALL NO. 2 HEATER TO REGISTER DUCT |
![]() |
Install the No. 2 heater to register duct with the 2 screws <F>.
| 7. INSTALL NO. 3 HEATER TO REGISTER DUCT |
![]() |
Install the No. 3 heater to register duct with the 3 screws <F>.
| 8. INSTALL NO. 1 HEATER TO REGISTER DUCT |
![]() |
Install the No. 1 heater to register duct with the 3 screws <F>.
| 9. INSTALL DEFROSTER NOZZLE ASSEMBLY |
![]() |
Install the defroster nozzle assembly with the 3 screws <F>.
| 10. INSTALL SIDE NO. 2 DEFROSTER NOZZLE DUCT |
![]() |
Install the side No. 2 defroster nozzle duct with the screw <F>.
| 11. INSTALL SIDE NO. 1 DEFROSTER NOZZLE DUCT |
![]() |
Install the side No. 1 defroster nozzle duct with the screw <F>.