Home › BODY › SEAT › POWER SEAT SWITCH

POWER SEAT SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL POWER SEAT SWITCH


    B134677
  1. Install the power seat switch with the 3 screws.

  1. Connect the connector.



2. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY


3. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


4. INSTALL RECLINING POWER SEAT SWITCH KNOB


5. INSTALL FRONT SEAT ASSEMBLY
  1. Place the seat in the cabin.

  1. Connect the connectors under the seat.

  1. Connect the cable to the negative (-) battery terminal.

  1. Move the front seat assembly fully forward by operating the slide and vertical power seat switch knob.

    NOTICE:
    Check that the seat is locked.



    B140607
  1. Temporarily install the front side of the front seat assembly with the 2 bolts.

  1. Move the front seat assembly fully forward by operating the slide and vertical power seat switch knob.

    NOTICE:
    Check that the seat is locked.



    B139102
  1. Temporarily install the rear side of the front seat assembly with the 2 bolts.

  1. Move the front seat assembly to the rearmost position by operating the slide and vertical power seat switch knob.

    NOTICE:
    Check that the seat is locked.

  1. Fully tighten the 2 bolts on the front side of the front seat assembly in the order of the inner side bolt and then the outer side bolt.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }

  1. Move the front seat assembly fully forward by operating the slide and vertical power seat switch knob.

    NOTICE:
    Check that the seat is locked.

  1. Fully tighten the 2 bolts on the rear side of the front seat assembly in the order of the inner side bolt and then the outer side bolt.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }



6. INSTALL INNER SEAT TRACK BRACKET COVER


    B139100E01
  1. Slide the inner seat track bracket cover along the seat rail toward the front of the vehicle. Engage claw A to the seat rail.

  1. Push the inner seat track bracket cover to engage claw B.



7. INSTALL SEAT TRACK COVER


    B139099E01
  1. Slide the seat track cover along the seat rail toward the front of the vehicle. Engage claw A to the seat rail.

  1. Push the seat track cover to engage claw B.