FRONT POWER SEAT LUMBAR SWITCH > INSTALLATION |
| 1. INSTALL FRONT POWER SEAT LUMBAR SWITCH |
![]() |
Install the front power seat lumbar switch with the 2 screws.
| 2. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY |
| 3. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB |
| 4. INSTALL RECLINING POWER SEAT SWITCH KNOB |
| 5. INSTALL FRONT SEAT ASSEMBLY |
Place the seat in the cabin.
Connect the connectors under the seat.
Connect the cable to the negative (-) battery terminal.
Move the front seat assembly fully forward by operating the slide and vertical power seat switch knob.
![]() |
Temporarily install the front side of the front seat assembly with the 2 bolts.
Move the front seat assembly fully forward by operating the slide and vertical power seat switch knob.
![]() |
Temporarily install the rear side of the front seat assembly with the 2 bolts.
Move the front seat assembly to the rearmost position by operating the slide and vertical power seat switch knob.
Fully tighten the 2 bolts on the front side of the front seat assembly in the order of the inner side bolt and then the outer side bolt.
Move the front seat assembly fully forward by operating the slide and vertical power seat switch knob.
Fully tighten the 2 bolts on the rear side of the front seat assembly in the order of the inner side bolt and then the outer side bolt.
| 6. INSTALL INNER SEAT TRACK BRACKET COVER |
![]() |
Slide the inner seat track bracket cover along the seat rail toward the front of the vehicle. Engage claw A to the seat rail.
Push the inner seat track bracket cover to engage claw B.
| 7. INSTALL SEAT TRACK COVER |
![]() |
Slide the seat track cover along the seat rail toward the front of the vehicle. Engage claw A to the seat rail.
Push the seat track cover to engage claw B.
| 8. INSTALL FRONT SEAT HEADREST ASSEMBLY |