Home › BODY › SEAT › FRONT POWER SEAT LUMBAR SWITCH

FRONT POWER SEAT LUMBAR SWITCH > INSPECTION

for Preparation Click here



1. INSPECT FRONT POWER SEAT LUMBAR SWITCH LH (for LHD)


    B105971E05
  1. Measure the resistance between the terminals when the switch is operated.

    Standard resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    U8-1 (R) - U8-2 (R1)
    FRONT
    Below 1 Ω
    U8-3 (B) - U8-4 (H)
    FRONT
    Below 1 Ω
    U8-1 (R) - U8-2 (R1)
    OFF
    Below 1 Ω
    U8-4 (H) - U8-5 (E)
    OFF
    Below 1 Ω
    U8-1 (R) - U8-3 (B)
    REAR
    Below 1 Ω
    U8-4 (H) - U8-5 (E)
    REAR
    Below 1 Ω

    If the result is not as specified, replace the switch.



2. INSPECT FRONT POWER SEAT LUMBAR SWITCH RH (for RHD)


    B081128E05
  1. Measure the resistance between the terminals when the switch is operated.

    Standard resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    T9-1 (R) - T9-2 (E2)
    FRONT
    Below 1 Ω
    T9-3 (B) - T9-4 (H)
    FRONT
    Below 1 Ω
    T9-1 (R) - T9-2 (E2)
    OFF
    Below 1 Ω
    T9-4 (H) - T9-5 (E)
    OFF
    Below 1 Ω
    T9-1 (R) - T9-3 (B)
    REAR
    Below 1 Ω
    T9-4 (H) - T9-5 (E)
    REAR
    Below 1 Ω

    If the result is not as specified, replace the switch.