Home › BODY ELECTRICAL › WIPER AND WASHER › WIPER RELAY

WIPER RELAY > INSTALLATION

for Preparation Click here



1. INSTALL WINDSHIELD WIPER RELAY ASSEMBLY


    E128848
  1. Install the windshield wiper relay assembly with the nut.

  1. Connect the connector.



2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY


    B133992E01
  1. Engage the 3 claws and 3 clips.

  1. Install the 4 screws <B>.

  1. Install the lower instrument panel sub-assembly with the bolt <A>.



3. INSTALL INSTRUMENT PANEL NO. 2 UNDER COVER SUB-ASSEMBLY


    B133989E01
  1. Engage the 4 claws and 2 guides and install the instrument panel No. 2 under cover.



4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

HINT:
Use the same procedures for the RH side and the LH side.



5. INSTALL FRONT DOOR SCUFF PLATE RH

HINT:
Use the same procedures for the RH side and the LH side.