Home › BODY ELECTRICAL › WIPER AND WASHER › RAIN SENSOR

RAIN SENSOR > REMOVAL

for Preparation Click here



1. REMOVE RAIN SENSOR COVER


    E128843
  1. Remove the rain sensor cover.



2. REMOVE RAIN SENSOR


    E128844E01
  1. Release the stopper by pulling the stopper down and disconnect the rain sensor as shown in the illustration.



    E128845
  1. Disconnect the connector and remove the rain sensor.



3. REMOVE RAIN SENSOR TAPE

HINT:
If replacing rain sensor tape.

  1. Remove the rain sensor tape.

    NOTICE:
    The rain sensor tape can be reused, however, replace it with a new one if it is dirty or damaged.