AMPLIFIER ANTENNA > INSTALLATION |
| 1. INSTALL AMPLIFIER ANTENNA ASSEMBLY |
![]() |
Install the amplifier antenna assembly with the bolt.
Connect each connector.
| 2. INSTALL ROOF SIDE INNER GARNISH RH |
| 3. INSTALL RECLINING REMOTE CONTROL LEVER SUB-ASSEMBLY RH (for Reclining Seat Type) |
| 4. CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH |
![]() |
Install the rear door opening trim weatherstrip RH as shown in the illustration.
| 5. INSTALL REAR DOOR SCUFF PLATE RH |
| 6. INSTALL SEPARATE TYPE REAR SEATBACK ASSEMBLY RH (for Reclining Seat Type) |
![]() |
Install the separate type rear seatback assembly RH with the 2 bolts and 2 nuts.
![]() |
Engage the 3 clamps and install the cover.
![]() |
Install the rear seat belt.
| 7. INSTALL REAR SEATBACK COVER (for Reclining Seat Type) |
| 8. INSTALL REAR SIDE SEATBACK ASSEMBLY RH (for Fold Down Seat Type) |
| 9. INSTALL SEPARATE TYPE REAR SEATBACK ASSEMBLY RH (for Fold Down Seat Type) |
![]() |
Install the separate type rear seat back assembly with the 2 bolts.
| 10. INSTALL REAR CENTER SEAT HEADREST ASSEMBLY (for Fold Down Seat Type) |
| 11. INSTALL REAR SEAT HEADREST ASSEMBLY |
| 12. INSTALL REAR SEAT CUSHION ASSEMBLY |
![]() |
Attach the front hooks of the bench type rear seat cushion assembly to the vehicle body.
Confirm that the seat cushion is firmly installed.