Home › BODY ELECTRICAL › LIGHTING › REAR ROOM LIGHT ASSEMBLY

REAR ROOM LIGHT ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL NO. 1 ROOM LIGHT ASSEMBLY (w/o Sliding Roof)


    B139562
  1. Engage the 4 claws and install the room light switch base to the No. 1 room light assembly.



    B139563
  1. Engage the 4 claws.



    B139564
  1. Engage the 4 claws and install the lens cover.



2. INSTALL SPOT LIGHT ASSEMBLY (w/ Sliding Roof)


    B132096
  1. Push the light bulb holder in the direction indicated by the arrow in the illustration to engage the claw.

  1. Engage the 4 claws.



    B132094
  1. Engage the 6 claws and install the spot light assembly.