IGNITION SWITCH > ON-VEHICLE INSPECTION |
| 1. INSPECT IGNITION OR STARTER SWITCH ASSEMBLY |
![]() |
Check the resistance.
Using an ohmmeter, measure the resistance between the terminals.
| Condition | Tester Connection | Specified Condition |
| LOCK | Between all terminals | 10 kΩ or higher |
| ACC | 2 - 4 | Below 1 Ω |
| ON | 1 - 2 - 4 | Below 1 Ω |
| 5 - 6 | ||
| START | 1 - 3 - 4 | Below 1 Ω |
| 5 - 6 - 7 |