FRONT SEAT CUSHION HEATER > REMOVAL |
| 1. REMOVE FRONT SEAT HEADREST ASSEMBLY |
| 2. REMOVE SEAT TRACK COVER |
Operate the power seat switch knob and move the seat to the position farthest forward.
![]() |
Using a screwdriver, detach the 4 claws and remove the seat track cover.
| 3. REMOVE INNER SEAT TRACK BRACKET COVER |
![]() |
Using a screwdriver, detach the 4 claws and remove the inner seat track bracket cover.
| 4. REMOVE FRONT SEAT ASSEMBLY |
Operate the power seat switch knob and move the seat to the rearmost position.
![]() |
Remove the 2 bolts on the front seat track bracket.
Operate the power seat switch knob and move the seat to the position farthest forward.
![]() |
Remove the 2 bolts on the rear seat track bracket.
Disconnect the cable from the negative (-) battery terminal.
Disconnect the connectors under the seat. Then remove the front seat assembly.
| 5. REMOVE RECLINING POWER SEAT SWITCH KNOB |
![]() |
Using a screwdriver, detach the reclining power seat switch knob.
| 6. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB |
![]() |
Using a screwdriver, detach the slide and vertical power seat switch knob.
| 7. REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY |
![]() |
Disconnect the 2 hooks.
![]() |
Remove the 5 screws.
Disengage the claw and separate the front seat cushion shield assembly.
Disconnect the connector from the front power seat lumbar switch.
| 8. REMOVE FRONT SEAT INNER BELT ASSEMBLY |
![]() |
Install the front seat inner belt assembly with the nut.
![]() |
for Driver seat:
Connect the connectors and engage the 4 clamps.
for Passenger seat:
Connect the connector and engage the 3 clamps.
| 9. REMOVE FRONT INNER SEAT CUSHION SHIELD |
![]() |
Remove the screw.
Using a clip remover, detach the clip.
Using a screwdriver, detach the claw and remove the front inner seat cushion shield.
| 10. REMOVE FRONT SEPARATE TYPE SEAT CUSHION COVER WITH PAD |
![]() |
Disconnect the 2 clamps.
Remove the 4 hooks.
![]() |
Using a screwdriver, detach the hooks and remove the front separate type seat cushion cover with pad.
| 11. REMOVE FRONT SEPARATE TYPE SEAT CUSHION COVER |
![]() |
Remove the 16 hog rings and front separate type seat cushion cover from the front separate type seat cushion pad.