Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › BLOWER UNIT

BLOWER UNIT > REASSEMBLY

for Preparation Click here



1. INSTALL BLOWER WITH FAN MOTOR SUB-ASSEMBLY


    E128540
  1. Install the blower with fan motor sub-assembly with the 3 screws.



2. INSTALL AIR INLET SERVO MOTOR


    E128539
  1. Install the air inlet servo motor with the 3 screws.



3. INSTALL CLEAN AIR FILTER


    E129158
  1. Install the clean air filter as shown in the illustration.



4. INSTALL AIR FILTER COVER PLATE


    E128537
  1. Engage the 2 claws to install the air filter cover plate.



5. INSTALL AIR DUCT SUB-ASSEMBLY


    E128536
  1. Engage the 4 claws to install the air duct sub-assembly.