Home › BODY › EXTERIOR › LUGGAGE COMPARTMENT DOOR GARNISH

LUGGAGE COMPARTMENT DOOR GARNISH > INSTALLATION

for Preparation Click here



1. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH


    B197922
  1. Engage the 2 clips and install the luggage compartment door outside garnish.



    B197180
  1. Install the 3 nuts.



2. INSTALL SYMBOL EMBLEM

HINT:
When installing the symbol emblem, heat the luggage compartment door outside garnish and symbol emblem using a heat light.

Heating Temperature:
Item
Temperature
Luggage compartment door outside garnish
40 to 60°C (104 to 140°F)
Symbol emblem
20 to 30°C (68 to 86°F)

NOTICE:
Do not heat the luggage compartment door outside garnish or symbol emblem excessively.

  1. Clean the luggage compartment door outside garnish surface.

    1. Using a heat light, heat the luggage compartment door outside garnish surface.

    2. Remove the double-sided tape from the luggage compartment door outside garnish.

    3. Wipe off any tape adhesive residue with cleaner.



    B195602
  1. Clean the symbol emblem. (If reusing the symbol emblem)

    1. Using a heat light, heat the symbol emblem.

    2. Remove the double-sided tape from the symbol emblem.

    3. Wipe off any tape adhesive residue with cleaner.

    4. Apply new double-sided tape to the symbol emblem.

  1. Install the symbol emblem.

    1. Using a heat light, heat the luggage compartment door outside garnish and symbol emblem.

    2. Remove the release paper from the symbol emblem.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. Install the symbol emblem.



3. INSTALL LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY


    B136497
  1. Install the luggage compartment door lock cylinder with the 2 nuts.

    Torque:
    5.5 N*m{ 56 kgf*cm , 49 in.*lbf }



    B136496
  1. Connect the cable and connector.



    B136492
  1. Connect the rod.



4. INSTALL LUGGAGE COMPARTMENT DOOR COVER


    B135465
  1. Install the luggage compartment door cover with the 13 clips.



5. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP (w/ Assist Grip)


    B189102
  1. Install the luggage compartment door assist grip with the 2 screws.



    B189103
  1. Engage the 3 claws and close the assist grip cover.