Home › BODY › EXTERIOR › LUGGAGE COMPARTMENT DOOR GARNISH

LUGGAGE COMPARTMENT DOOR GARNISH > REMOVAL

for Preparation Click here



1. REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP (w/ Assist Grip)


    B189101E01
  1. Using a screwdriver, disengage the 3 claws and open the assist grip cover.

    HINT:
    Tape the screwdriver tip before use.



    B189102
  1. Remove the 2 screws and luggage compartment door assist grip.



2. REMOVE LUGGAGE COMPARTMENT DOOR COVER


    B135465
  1. Using a clip remover, remove the 13 clips and luggage compartment door cover.



3. REMOVE LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY


    B136491
  1. Disconnect the rod.



    B136496
  1. Disconnect the cable and connector.



    B136497
  1. Remove the 2 nuts and luggage compartment door lock cylinder assembly.



4. REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH ASSEMBLY


    B135459E01
  1. Put protective tape around the luggage compartment door outside garnish assembly.



    B135460
  1. Remove the 3 nuts.



    B135461
  1. Using a moulding remover, disengage the 2 clips and remove the luggage compartment door outside garnish assembly.



5. REMOVE LUGGAGE DOOR OPENING SWITCH ASSEMBLY (w/ Entry and Start System)
  1. w/o Rear View Monitor System:
  2. w/ Rear View Monitor System:


6. REMOVE REAR TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System)
  1. w/o Entry and Start System:
  2. w/ Entry and Start System:


7. REMOVE SYMBOL EMBLEM

HINT:
When removing the symbol emblem, heat the luggage compartment door outside garnish and symbol emblem using a heat light.

Heating Temperature :
Item
Temperature
Luggage compartment door outside garnish
40 to 60°C (104 to 140°F)
Symbol emblem
20 to 30°C (68 to 86°F)

NOTICE:
Do not heat the luggage compartment door outside garnish and symbol emblem excessively.

  1. Put protective tape around the symbol emblem.



    B195601E01
  1. Insert a piano wire between the luggage compartment door outside garnish and symbol emblem.

  1. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

  1. Pull the piano wire to cut through the double-sided tape that holds the symbol emblem to the luggage compartment door outside garnish.

    NOTICE:
    1. If reusing the symbol emblem, take care not to damage the symbol emblem.
    2. Be careful not to damage the luggage compartment door outside garnish.

  1. Remove the symbol emblem.