REAR BUMPER > INSTALLATION |
| 1. INSTALL REAR BUMPER ASSEMBLY |
![]() |
Install the rear bumper assembly with the 6 screws and 2 clips.
Engage each claw.
![]() |
Install the 2 rear bumper plates.
| 2. INSTALL REAR QUARTER PANEL MUDGUARD SUB-ASSEMBLY LH (w/ Rear Fender Mudguard) |
![]() |
Install the rear quarter panel mudguard sub-assembly LH with the 3 screws.
| 3. INSTALL REAR QUARTER PANEL MUDGUARD SUB-ASSEMBLY RH (w/ Rear Fender Mudguard) |