Home › BODY › EXTERIOR › REAR BUMPER

REAR BUMPER > DISASSEMBLY

for Preparation Click here



1. REMOVE REAR BUMPER PLATE LH


2. REMOVE REAR BUMPER PLATE RH


3. REMOVE REAR BUMPER PAD


    B146333
  1. Remove the rear bumper pad.

    HINT:
    Use the same procedures for the RH side and LH side.



4. REMOVE REAR BUMPER SIDE SUPPORT LH


    B137219
  1. Remove the 2 screws.

  1. Disengage the 3 claws and remove the rear bumper side support LH.



5. REMOVE REAR BUMPER SIDE SUPPORT RH


6. REMOVE REAR BUMPER SIDE RETAINER LH


    B137220
  1. Remove the 2 screws.

  1. Disengage the 3 claws and remove the rear bumper side retainer LH.



7. REMOVE REAR BUMPER SIDE RETAINER RH


8. REMOVE WHEEL HOUSE REINFORCEMENT LH


    B137221
  1. Remove the nut and wheel house reinforcement LH.



9. REMOVE WHEEL HOUSE REINFORCEMENT RH


10. REMOVE REAR BUMPER ENERGY ABSORBER


    B137210
  1. Remove the rear bumper energy absorber from the rear bumper reinforcement sub-assembly.



11. REMOVE REAR BUMPER REINFORCEMENT SUB-ASSEMBLY


    B137217
  1. Remove the 6 nuts and rear bumper reinforcement sub-assembly.