Home › BODY › EXTERIOR › ROCKER PANEL MOULDING

ROCKER PANEL MOULDING > REMOVAL

for Preparation Click here



1. REMOVE ROCKER PANEL MOULDING PROTECTOR


    B135471
  1. Remove the 2 screws and rocker panel moulding protector.



2. REMOVE ROCKER PANEL MOULDING (w/o Front Fender Mudguard)


  1. Put protective tape around the rocker panel moulding.


    B135470E01



    B135472
  1. Remove the 2 screws and grommet.



    B135473
  1. Remove the screw.



    B135475
  1. Remove the 7 clips.



    B135474
  1. Remove the 2 screws.



    B135476
  1. Disengage the 8 clips and remove the rocker panel moulding.



3. REMOVE FRONT FENDER MUDGUARD SUB-ASSEMBLY (w/ Front Fender Mudguard)


    B135467
  1. Remove the 3 screws and front fender mudguard sub-assembly.



4. REMOVE ROCKER PANEL MOULDING (w/ Front Fender Mudguard)


  1. Put protective tape around the rocker panel moulding.


    B135470E01



    B135468
  1. Remove the grommet.



    B135473
  1. Remove the screw.



    B135475
  1. Remove the 7 clips.



    B135474
  1. Remove the 2 screws.



    B135476
  1. Disengage the 8 clips and remove the rocker panel moulding.