STEERING PAD SWITCH > REMOVAL |
| 1. REMOVE CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE NO. 3 LOWER STEERING WHEEL COVER |
![]() |
Using a screwdriver, disengage the claw and remove the No. 3 lower steering wheel cover.
| 3. REMOVE NO. 2 LOWER STEERING WHEEL COVER |
![]() |
Using a screwdriver, disengage the claw and remove the No. 2 lower steering wheel cover.
| 4. REMOVE STEERING PAD |
![]() |
Using a "TORX" socket (T30), loosen the 2 "TORX" screws until the groove along the screw circumference catches on the screw case.
![]() |
Pull out the steering pad from the steering wheel assembly and support the steering pad with one hand.
Disconnect the horn connector from the steering pad.
Disconnect the 2 airbag connectors and remove the steering pad.
Remove the steering pad.
| 5. REMOVE STEERING PAD SWITCH ASSEMBLY |
![]() |
Disconnect the pad switch connector from the spiral cable.
Remove the screw.
Disengage the 2 pins and remove the steering pad switch.
![]() |
Remove the screw.
Disengage the 2 pins and remove the steering pad switch assembly.