Home › TRANSMISSION ยท U660E AUTOMATIC TRANSAXLE › DIFFERENTIAL CASE

DIFFERENTIAL CASE > DISASSEMBLY

for Preparation Click here



1. REMOVE FRONT DIFFERENTIAL RING GEAR


    C138531E01
  1. Put matchmarks on the front differential ring gear and differential case.



    C138532
  1. Remove the 12 bolts.



    C138533
  1. Using a plastic hammer, tap on the front differential ring gear to remove it from the case.



2. REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING


    C138534E01
  1. Using SST, remove the front differential case front tapered roller bearing from the differential case.

    SST
    09950-00020  
    09950-00030  
    09950-60010   (09951-00480)



    C138537E01
  1. Using SST, remove the front differential case front tapered roller bearing outer race and shim from the transaxle housing.

    SST
    09308-00010  



3. REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING


    C138535E01
  1. Using SST, remove the front differential case rear tapered roller bearing from the differential case.

    SST
    09950-00020  
    09950-00030  
    09950-60010   (09951-00480)



    C138536E01
  1. Using SST, remove the front differential case rear tapered roller bearing outer race from the transaxle case.

    SST
    09308-00010  



4. REMOVE FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN


    C138710
  1. Using a pin punch (3 mm) and hammer, remove the straight pin.

    NOTICE:
    Before removing the straight pin, unstake it with a pin punch.



5. REMOVE FRONT NO. 1 DIFFERENTIAL PINION SHAFT


    C138706
  1. Remove the front No. 1 differential pinion shaft from the differential case.



6. REMOVE DIFFERENTIAL SIDE GEAR


    C138528
  1. Remove the 2 front differential pinions, 2 pinion thrust washers, 2 front differential side gears, and 2 side gear thrust washers from the differential case.



7. REMOVE FRONT TRANSAXLE CASE OIL SEAL


    C138708E01
  1. Using SST and a hammer, remove the front transaxle case oil seal from the transaxle housing.

    SST
    09950-60010   (09951-00540)
    09950-70010   (09951-07200)



8. REMOVE TRANSAXLE CASE OIL SEAL


    C138709E01
  1. Using SST and a hammer, remove the transaxle case oil seal from transaxle case.

    SST
    09950-60010   (09951-00650)
    09950-70010   (09951-07100)