HEADLIGHT ASSEMBLY > DISASSEMBLY |
| 1. REMOVE NO. 2 HEADLIGHT BULB |
![]() |
Remove the No. 2 headlight bulb as shown in the illustration.
| 2. REMOVE NO. 1 HEADLIGHT BULB (for Halogen Headlight) |
![]() |
Remove the No. 1 headlight bulb as shown in the illustration.
| 3. REMOVE HEADLIGHT SOCKET COVER (for HID Headlight) |
![]() |
Remove the headlight socket cover as shown in the illustration.
| 4. REMOVE DISCHARGE HEADLIGHT BULB (for HID Headlight) |
![]() |
Separate the light control ECU socket as shown in the illustration.
![]() |
Release the set spring and remove the discharge headlight bulb as shown in the illustration.
| 5. REMOVE FRONT TURN SIGNAL LIGHT BULB |
![]() |
Turn the front turn signal light bulb and the front turn signal light socket in the direction indicated by the arrow and remove them as a unit.
Remove the front turn signal light bulb from the front turn signal light socket.
| 6. REMOVE FRONT TURN SIGNAL LIGHT SOCKET |
| 7. REMOVE CLEARANCE LIGHT BULB |
![]() |
Turn the clearance light bulb and the clearance light socket in the direction indicated by the arrow and remove them as a unit.
Remove the clearance light bulb from the clearance light socket.
| 8. REMOVE CLEARANCE LIGHT SOCKET |
| 9. REMOVE LIGHT CONTROL ECU SUB-ASSEMBLY (for HID Headlight) |
![]() |
Remove the 4 screws.
![]() |
Disconnect the connector and remove the light control ECU sub-assembly.
| 10. REMOVE HEADLIGHT GASKET (for HID Headlight) |
Remove the headlight gasket.
| 11. REMOVE HEADLIGHT LEVELING MOTOR |
![]() |
Turn the headlight leveling motor LH in the direction indicated by the arrow to disengage it.
![]() |
Turn the aiming screw of the headlight leveling motor LH in the direction indicated by the arrow to disengage the shaft.
Pull and remove the headlight leveling motor LH.
| 12. REMOVE HEADLIGHT LEVELING MOTOR BASE PACKING |
Remove the headlight leveling motor base packing.