HEADLIGHT ASSEMBLY > REASSEMBLY |
| 1. INSTALL HEADLIGHT LEVELING MOTOR BASE PACKING |
Install a new headlight leveling motor base packing.
| 2. INSTALL HEADLIGHT LEVELING MOTOR |
![]() |
Turn the aiming screw of the headlight leveling motor LH in the direction indicated by the arrow to engage the shaft.
![]() |
Turn the headlight leveling motor LH in the direction indicated by the arrow to install it.
| 3. INSTALL HEADLIGHT GASKET (for HID Headlight) |
Install a new headlight gasket.
| 4. INSTALL LIGHT CONTROL ECU SUB-ASSEMBLY (for HID Headlight) |
![]() |
Connect the connector.
![]() |
Install the light control ECU sub-assembly with the 4 screws.
| 5. INSTALL CLEARANCE LIGHT SOCKET |
| 6. INSTALL CLEARANCE LIGHT BULB |
Install the clearance light bulb to the clearance light socket.
![]() |
Turn the clearance light bulb and clearance light socket in the direction indicated by the arrow and install them as a unit.
| 7. INSTALL FRONT TURN SIGNAL LIGHT SOCKET |
| 8. INSTALL FRONT TURN SIGNAL LIGHT BULB |
Install the front turn signal light bulb to the front turn signal light socket.
![]() |
Turn the front turn signal light bulb and front turn signal light socket in the direction indicated by the arrow and install them as a unit.
| 9. INSTALL NO. 1 HEADLIGHT BULB (for Halogen Headlight) |
![]() |
Install the No. 1 headlight bulb as shown in the illustration.
| 10. INSTALL DISCHARGE HEADLIGHT BULB (for HID Headlight) |
![]() |
Lock the set spring to install the discharge headlight bulb as shown in the illustration.
![]() |
Turn the light control ECU socket in the direction indicated by the arrow to connect it.
| 11. INSTALL HEADLIGHT SOCKET COVER (for HID Headlight) |
![]() |
Install the headlight socket cover as shown in the illustration.
| 12. INSTALL NO. 2 HEADLIGHT BULB |
![]() |
Install the No. 2 headlight bulb as shown in the illustration.