SIDE TURN SIGNAL LIGHT ASSEMBLY > INSTALLATION |
| 1. INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY |
![]() |
Connect the connector.
Install the side turn signal light assembly with the 3 screws.
| 2. INSTALL OUTER MIRROR COVER |
![]() |
Engage the 7 claws and install the outer mirror cover.
| 3. INSTALL OUTER REAR VIEW MIRROR GLASS (w/o Mirror Heater) |
![]() |
Engage the 2 claws on the upper part of the outer rear view mirror glass to the outer rear view mirror.
Engage the 2 claws on the lower part of the outer rear view mirror glass to the outer rear view mirror as shown in the illustration.
| 4. INSTALL OUTER REAR VIEW MIRROR GLASS (w/ Mirror Heater) |
![]() |
Connect the connector.
![]() |
Engage the 2 claws on the upper part of the outer rear view mirror glass to the outer rear view mirror.
Engage the 2 claws on the lower part of the outer rear view mirror glass to the outer rear view mirror as shown in the illustration.