DTC 43 ABS Control System Malfunction |
| DTC No. | DTC Detection Condition | Trouble Area |
| 43 | Malfunction in the ABS control system. | ABS control system |
| 1.CHECK ABS CONTROL SYSTEM |
Clear the DTC (Click here).
Turn the ignition switch to the ON position.
Check if the same DTC is recorded (Click here).
| Condition | Proceed to |
| DTC (ABS control system DTC) is not output | A |
| DTC (ABS control system DTC) is output | B |
|
| ||||
| A | |
| 2.RECONFIRM DTC |
Clear the DTC (Click here).
Turn the ignition switch to the ON position.
Check if the same DTC is recorded (Click here).
| Condition | Proceed to |
| DTC (43) is not output | A |
| DTC (43) is output | B |
|
| ||||
| A | ||
| ||