TRANSMISSION WIRE > INSTALLATION |
| 1. INSTALL TRANSMISSION WIRE |
![]() |
Coat the O-ring with ATF.
Coat the bolt with ATF.
![]() |
Install the transmission wire and lock plate to the valve body with the bolt.
![]() |
Install the transmission wire to the clamp.
Connect the 9 connectors.
| 2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY |
Coat the O-ring of the transmission wire with ATF.
![]() |
Confirm that the manual valve lever is positioned as shown in the illustration and install the valve body assembly to the transaxle case with the 11 bolts.
| 3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY |
![]() |
Coat a new O-ring with ATF and install it to the oil strainer.
![]() |
Install the oil strainer to the valve body with the 2 bolts.
| 4. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY |
![]() |
Install the 2 magnets to the oil pan.
Install a new gasket to the oil pan.
Apply adhesive or equivalent to the 18 bolts.
![]() |
Install the oil pan from the automatic transaxle with the 18 bolts.
| 5. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY |