Home › TRANSMISSION ยท U660E AUTOMATIC TRANSAXLE › TCM

TCM > REMOVAL

for Preparation Click here


NOTICE:
When the TCM is replaced, the existing transaxle compensation codes must be input into the new TCM .



1. REMOVE COOL AIR INTAKE DUCT SEAL


    A132967
  1. Remove the 7 clips and intake duct seal.



2. REMOVE BATTERY


    A132972
  1. Loosen the bolt and nut, and remove the battery clamp.

  1. Remove the battery and battery tray.



3. REMOVE AIR CLEANER INLET ASSEMBLY


    A132969
  1. Remove the 2 bolts, clamp and air cleaner inlet.



4. REMOVE NO. 1 AIR CLEANER INLET


    A132970
  1. Remove the bolt and No. 1 air cleaner inlet.



5. REMOVE INTAKE AIR RESONATOR SUB-ASSEMBLY


    A133928
  1. Remove the clip, bolt and intake air resonator.



6. REMOVE TCM


    C133604
  1. Turn the lock lever and disconnect the connector from the TCM.



    C139840E01
  1. Remove the 2 bolts and TCM from the transaxle.