HIGH INTENSITY DISCHARGE HEADLIGHT BULB > INSTALLATION |
| 1. INSTALL DISCHARGE HEADLIGHT BULB |
![]() |
Lock the set spring to install the discharge headlight bulb as shown in the illustration.
![]() |
Turn the light control ECU socket in the direction indicated by the arrow to connect it.
| 2. INSTALL HEADLIGHT SOCKET COVER |
![]() |
Install the headlight socket cover as shown in the illustration.
| 3. INSTALL COOL AIR INTAKE DUCT SEAL (for 2GR-FE) |
![]() |
Install the cool air intake duct seal with the 7 clips.
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |