Home › BODY ELECTRICAL › LIGHTING › HIGH INTENSITY DISCHARGE HEADLIGHT BULB

HIGH INTENSITY DISCHARGE HEADLIGHT BULB > INSTALLATION

for Preparation Click here



1. INSTALL DISCHARGE HEADLIGHT BULB


    E181823E01
  1. Lock the set spring to install the discharge headlight bulb as shown in the illustration.

    NOTICE:
    Do not touch the bulb glass.



    E181824
  1. Turn the light control ECU socket in the direction indicated by the arrow in the illustration to connect it.



2. INSTALL HEADLIGHT SOCKET COVER


    E181826
  1. Turn the headlight socket cover in the direction indicated by the arrow in the illustration to install it.



3. INSTALL COOL AIR INTAKE DUCT SEAL (for 2GR-FE)


    B138886
  1. Install the cool air intake duct seal with the 7 clips.



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL