Home › BODY ELECTRICAL › LIGHTING › HIGH INTENSITY DISCHARGE HEADLIGHT BULB

HIGH INTENSITY DISCHARGE HEADLIGHT BULB > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE COOL AIR INTAKE DUCT SEAL (for 2GR-FE)


    B138886
  1. Remove the 7 clips and cool air intake duct seal.



3. REMOVE HEADLIGHT SOCKET COVER


    E128257
  1. Remove the headlight socket cover as shown in the illustration.



4. REMOVE DISCHARGE HEADLIGHT BULB


    E128239
  1. Separate the light control ECU socket as shown in the illustration.



    E128241E01
  1. Release the set spring and remove the discharge headlight bulb as shown in the illustration.