HIGH INTENSITY DISCHARGE HEADLIGHT BULB > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE COOL AIR INTAKE DUCT SEAL (for 2GR-FE) |
![]() |
Remove the 7 clips and cool air intake duct seal.
| 3. REMOVE HEADLIGHT SOCKET COVER |
![]() |
Remove the headlight socket cover as shown in the illustration.
| 4. REMOVE DISCHARGE HEADLIGHT BULB |
![]() |
Separate the light control ECU socket as shown in the illustration.
![]() |
Release the set spring and remove the discharge headlight bulb as shown in the illustration.