Home › SERVICE SPECIFICATIONS › SERVICE SPECIFICATIONS › 2AZ-FE STARTING

2AZ-FE STARTING > SERVICE DATA



Starter assembly
Specified current
90 A or less at 11.5 V
Magnet starter switch assembly
Tester Connection
Terminal 50 - Terminal C
Below 1 Ω
Terminal 50 - Switch body
Below 2 Ω
Starter armature assembly
Tester Connection
Segment - Segment
Below 1 Ω
Commutator - Armature coil core
10 kΩ or higher
Standard depth
3.1 to 3.8 mm (0.122 to 0.149 in.)
Minimum depth
3.8 mm (0.149 in.)
Brush length
Standard length
4.0 to 9.0 mm (0.158 to 0.354 in.)
Minimum length
4.0 mm (0.158 in.)
Tester Connection
Positive (+) brush - Negative (-) brush
10 kΩ or higher
Starter relay
Specified condition
3 - 5
(when battery voltage is applied to terminals 1 and 2)
Below 1 Ω
3 - 5
10 kΩ or higher
Ignition switch
Resistance
LOCK: Between all terminals
10 kΩ or higher
ACC: 2 (ACC) - 4 (AM1)
Below 1 Ω
ON: 1 (IG1) - 2 (ACC) - 4 (AM1)
ON: 5 (AM2) - 6 (IG2)
START: 1 (ST1) - 3 (ST1) - 4 (AM1)
START: 5 (AM2) - 6 (IG2) - 7 (ST2)