AIR CONDITIONING CONTROL ASSEMBLY > REASSEMBLY |
| 1. INSTALL CONTROL KNOB SUB-ASSEMBLY (for Automatic Air Conditioning System) |
Driver Side:
Engage the dual push switch with dial on the heater control base sub-assembly.
![]() |
Engage the 3 claws.
![]() |
Engage the 3 claws and install the control knob sub-assembly.
Passenger Side:
![]() |
Engage the 3 claws and install the control knob sub-assembly.
![]() |
Install the heater control base sub-assembly with the 5 screws.
![]() |
Engage the 4 claws and install the control panel case.
| 2. INSTALL AIR CONDITIONING PANEL SUB-ASSEMBLY (for Automatic Air Conditioning System) |
![]() |
Engage the 4 claws and install the ornament.
![]() |
Engage the 4 claws.
Install the air conditioning panel sub-assembly with the 5 screws.