Home › SERVICE SPECIFICATIONS › SERVICE SPECIFICATIONS › CLUTCH

CLUTCH > SERVICE DATA



Pedal height from asphalt sheet
LHD
148.0 to 158.0 mm (5.8268 to 6.2205 in.)
RHD
164.7 to 174.7 mm (6.4842 to 6.8779 in.)
Clutch pedal free play
5.0 to 15.0 mm (0.197 to 0.591 in.)
Clutch pedal push rod play at pedal top
1.0 to 5.0 mm (0.039 to 0.197 in.)
Clutch release point from pedal full stroke end position
25 mm (0.98 in.) or more
Disc rivet head depth
Minimum
0.3 mm (0.012 in.)
Disc runout
Maximum
0.8 mm (0.031 in.)
Diaphragm spring finger wear
Maximum depth:
0.5 mm (0.020 in.)
Maximum width:
6.0 mm (0.236 in.)
Flywheel runout
Maximum
0.1 mm (0.004 in.)
Diaphragm spring tip alignment
Maximum variation:
0.5 mm (0.020 in.)
Clutch start switch assembly
Specified condition
Switch position ON (pushed)
Below 1 Ω
Switch position OFF (not pushed)
10 kΩ or higher