Home › SERVICE SPECIFICATIONS › SERVICE SPECIFICATIONS › 2GR-FE COOLING

2GR-FE COOLING > SERVICE DATA



THERMOSTAT 
Condition
Specified Condition
Standard valve opening temperature
80 to 84°C (176 to 183°F)
Standard valve lift
7.7 mm (0.3031 in.) or more at 95°C (203°F)

COOLING FAN MOTOR 
Item
Condition
Specified Condition
Cooling fan motor
(w/o Trailer hitch)
at 20°C (68°F)
6.8 to 9.8 A
Cooling fan motor
(w/ Trailer towing system)
at 20°C (68°F)
11.8 to 14.8 A
No. 2 cooling fan motor
(w/o Trailer hitch)
at 20°C (68°F)
6.8 to 9.8 A
No. 2 cooling fan motor
(w/ Trailer hitch)
at 20°C (68°F)
6.8 to 9.8 A

COOLING FAN ECU 
Item
Condition
Specified Condition
Cooling fan ECU
Ignition switch on (IG).
Turn the ignition switch to the ON position.
9 to 14 V

COOLING FAN RELAY 
Item
Tester Connection
Specified Condition
Cooling fan relay
3 - 5
10 Ω or higher
3 - 5
Below 1 Ω
(when battery voltage is applied to terminals 1 and 2)

RADIATOR 
Item
Tester Connection
Specified Condition
Radiator reservoir cap
For brand-new cap
93.3 to 122.7 kPa (0.95 to 1.25 kgf/cm2, 13.5 to 17.8 psi)
After using cap
78.5 kPa (0.8 kgf/cm2, 11.4 psi)