Home › BODY ELECTRICAL › LIGHTING › HEADLIGHT ASSEMBLY

HEADLIGHT ASSEMBLY > REPAIR

for Preparation Click here


HINT:
  1. If the installation area of the headlight assembly is damaged, use the supply bracket for low-cost repair.
  2. Ensure that the headlight assembly is not damaged.



1. INSTALL UPPER HEADLIGHT PROTECTOR RETAINER


    E148827
  1. Cut off the part shaded in the illustration and smooth with sandpaper.

    NOTICE:
    After cutting off the part, place the upper headlight protector retainer against the bosses and gradually file away the old retainer if it interferes with the installation of the supply bracket.



    E148828
  1. Install the upper headlight protector retainer with the 2 screws.



2. INSTALL LOWER HEADLIGHT PROTECTOR RETAINER


    E148831
  1. Cut off the part shaded in the illustration and smooth with sandpaper.

    NOTICE:
    After cutting off the part, place the lower headlight protector retainer against the bosses and gradually file away the old retainer if it interferes with the installation of the supply bracket.



    E148832
  1. Install the lower headlight protector retainer with the 2 screws.



3. INSTALL LOWER HEADLIGHT BRACKET


    E148829
  1. Cut off the part shaded in the illustration and smooth with sandpaper.

    NOTICE:
    After cutting off the part, place the lower headlight bracket against the bosses and gradually file away the old bracket if it interferes with the installation of the supply bracket.



    E148830
  1. Install the lower headlight bracket with the 2 screws.