Home › BODY ELECTRICAL › DOOR LOCK › DOOR CONTROL RECEIVER (for Rear Side)

DOOR CONTROL RECEIVER (for Rear Side) > INSTALLATION

for Preparation Click here



1. INSTALL DOOR CONTROL RECEIVER


    B223345
  1. Install the door control receiver with the bolt.

  1. Connect the connector.



2. INSTALL ROOF SIDE INNER GARNISH RH

HINT:
Use the same procedure for the RH side and LH side .



3. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

HINT:
Use the same procedure for the RH side and LH side .



4. INSTALL REAR DOOR SCUFF PLATE RH

HINT:
Use the same procedure for the RH side and LH side .



5. INSTALL REAR SIDE SEAT BACK ASSEMBLY RH (for Fold Down Seat Type)

HINT:
Use the same procedure for the RH side and LH side .



6. INSTALL RECLINING REMOTE CONTROL LEVER SUB-ASSEMBLY RH (for Reclining Seat Type)

HINT:
Use the same procedure for the RH side and LH side .



7. INSTALL SEPARATE TYPE REAR SEATBACK ASSEMBLY RH (for Reclining Seat Type)


    B139079
  1. Install the separate type rear seatback assembly RH with the 2 bolts and 2 nuts.

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }



    B139082E01
  1. Engage the 3 clamps and install the cover.



    B139078E01
  1. Install the rear seat belt.



8. INSTALL REAR SEAT BACK COVER (for Reclining Seat Type)


9. INSTALL REAR SEAT HEADREST ASSEMBLY (for Reclining Seat Type)
  1. Install the 2 rear seat headrest assemblies.



10. INSTALL REAR SEAT CUSHION ASSEMBLY
for Fold Down Seat Type:
for Reclining Seat Type: