DOOR CONTROL RECEIVER (for Rear Side) > REMOVAL |
| 1. REMOVE REAR SEAT CUSHION ASSEMBLY |
| 2. REMOVE REAR SEAT HEADREST ASSEMBLY (for Reclining Seat Type) |
Remove the 2 rear seat headrest assemblies.
| 3. REMOVE REAR SEAT BACK COVER (for Reclining Seat Type) |
![]() |
Using a screwdriver, detach the claws and remove the 2 rear seatback covers.
| 4. REMOVE SEPARATE TYPE REAR SEATBACK ASSEMBLY RH (for Reclining Seat Type) |
![]() |
Separate the rear seat belt.
![]() |
Disengage the 3 clamps and then separate the cover.
![]() |
Remove the 2 bolts and 2 nuts and separate type rear seatback assembly RH.
| 5. REMOVE REAR SIDE SEAT BACK ASSEMBLY RH (for Fold Down Seat Type) |
| 6. REMOVE RECLINING REMOTE CONTROL LEVER SUB-ASSEMBLY RH (for Reclining Seat Type) |
| 7. REMOVE REAR DOOR SCUFF PLATE RH |
| 8. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH |
| 9. REMOVE ROOF SIDE INNER GARNISH RH |
| 10. REMOVE DOOR CONTROL RECEIVER |
![]() |
Disconnect the connector.
Remove the bolt and door control receiver.