Home › BODY ELECTRICAL › PARK ASSIST / MONITORING › CLEARANCE SONAR MAIN SWITCH

CLEARANCE SONAR MAIN SWITCH > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY


    B133986
  1. Disengage the 3 claws and the 2 clips.

  1. Disconnect each connector and remove the instrument panel sub-assembly.



2. REMOVE CLEARANCE SONAR MAIN SWITCH


    E163883
  1. Disengage the 2 claws and remove the clearance sonar main switch.