Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM

DTC    B15B8    Harddisk Malfunction

for Preparation Click here


DESCRIPTION

This DTC is stored when the hard disk drive which is built into the navigation receiver assembly has an initialization malfunction or read/write errors occur more than a specified number of times.

DTC No.
DTC Detection Condition
Trouble Area
B15B8
Hard Disk Drive (HDD) malfunction.
Navigation receiver assembly

INSPECTION PROCEDURE

1.CHECK HARD DISK DRIVE (OPERATION CHECK)


    E181026E01
  1. Display the "Failure Diagnosis" screen (Click here).

  1. Select "HDD Check" and check the result.

    OK:
    "OK" is displayed.

    HINT:
    After "HDD Check" is selected, it may take a while until the result is displayed.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
OK


2.CHECK DTC
  1. Clear the DTC (Click here).

  1. Recheck for DTCs and check if the same trouble occurs again.

    OK:
    No DTC are output.

    HINT:
    The hard disk drive may be malfunctioning even if DTC B15B8 is not output.



NG
USE SIMULATION METHOD TO CHECK (Click here)
OK

REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)