REAR VIEW MONITOR SYSTEM > DTC CHECK / CLEAR |
| CHECK DTC |
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Read the DTCs following the prompts on the intelligent tester. Enter the following menus: Body / Navigation System / DTC.
Check the details of the DTCs (Click here).
| System | Proceed to |
| Navigation System |
Click here
|
| CLEAR DTC |
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Operate the intelligent tester to clear the codes. Enter the following menus: Body / Navigation System / DTC.
According to the display on the intelligent tester, select the trouble code data display with the clear button.